Menu
ZENiX View is a visualization software that clearly
shows the status of the system in the building.
Rf-Technologies can deliver the software, installed
on a panel PC of 15 ”or 21.5”. With ZENiX View you
can, based on pre-loaded plans of the building, display
the status of all dampers, shutters, inputs and outputs in
real time. In this way, the status of the bus system
and all its components becomes clear at a glance.
The ZENiX-100 controller (master) monitors and controls fire dampers,
smoke control dampers and shutters, as well as digital inputs and outputs.
Each ZENiX-100 controller manages up to 100 field modules. Multiple ZENiX-100
controllers can be connected in one network. The ZENiX-100 can work with a
pre-programmed basic fire scenario, but it is also possible to program
multiple scenarios (matrix). It can be used as a stand-alone solution
or integrated into a BMS system via a BACnet IP connection.
The ZENiX-100 controller (master) monitors and controls fire dampers,
smoke control dampers and shutters, as well as digital inputs and outputs.
Each ZENiX-100 controller manages up to 100 field modules. Multiple ZENiX-100
controllers can be connected in one network. The ZENiX-100 can work with a
pre-programmed basic fire scenario, but it is also possible to program
multiple scenarios (matrix). It can be used as a stand-alone solution
or integrated into a BMS system via a BACnet IP connection.
The ONE-X is a fire damper actuator with integrated field module.
The ONE-X spring return actuator can be mounted on all
Rf-Technologies fire dampers. Because the field module is
integrated, there is no need to provide a connection between
the actuator and the field module. This saves time and reduces
the risk of errors.
ZENiX is a complete monitoring and controlling system for fire dampers, smoke dampers and shutters, for entrances and exits.
For the communication, we create a communication loop that starts from the electrical cabinet where the controller is located and then extends from one ONE-X to another.
The communication loop does not need a specific sequence. The only requirement is to respect the color combination (or numbering) of the cables, which greatly simplifies an installation.
The ZENiX web tool software is included and pre-installed on the ZENiX-100 controller. The software can be used both for programming the (fire) scenarios and for monitoring, managing and testing the components.
In the technical brochure you can find all the relevant information about the ZENiX Controller. Technical specifications about our monitoring and controlling system, different features, system components and so on are described in detail here.
The ZENiX 1SD24 field module is used
